SPA-2XOC48POS/RPR

4.8 11

Model:	SPA-2XOC48POS/RPR Cisco ASR 9000 Series Shared Port Adapter
Detail:	Cisco ASR 9000 Adapter SPA-2XOC48POS/RPR 2-port OC48/STM16 POS/RPR Shared Port Adapters
List Price:	$87,400.00
Price:	$33,955.00
Condition:	Brand New Sealed
Availability:	In stock
Shipping:	Express Shipping to world 2-10 Days, via DHL, FedEx, EMS, etc. ? If you finish the payment today, your order will arrive within the estimated delivery time.

US$ 0.00 In stock Brand New Sealed

Ask Our Experts

+86-755-83613914 (Tel)
+86-13824318994 (Mob)
86-755-25524084 (Fax)

Get Quotes up to
2x Faster

Project Inquiry

Overview

SPA-2XOC48POS/RPR is the Cisco Router Shared Pt Adapter. This Cisco 1-, 2-, and 4-Pt OC-48c/STM-16c POS/RPR SPAs are available on high-end Cisco routing platfms and offers the benefits of netwk scalability with lower initial costs and easy upgrades. The SPAs continues the Cisco focus on investment protection along with consistent feature suppt, broad interface availability, and leading-edge technology. The SPAs allow different interfaces (POS, ATM, etc.) to be deployed on the same carrier card.

Quick Specs

This figure shows the appearance of Cisco 1-, 2-, and 4-Pt OC-48c/STM-16c POS/RPR SPAs.

Table 1 shows the quick specs.

Model	SPA-2XOC48POS/RPR
Type	Cisco Router Shared Pt Adapter
Product compatibility	Cisco Catalyst 6500 Series Switches Cisco 7600 Series Routers Cisco 12000 Series Routers Cisco XR 12000 Series Routers Cisco ASR 1000 Series Router Cisco ASR 9000 Series Router(2 pt only) Cisco CRS Carrier Routing System(2 and 4 pt only)
Pt density per SPA	1, 2, and 4 pts
Physical interface (channelized OC-12)	OC-48c/STM-16c SFP optics module (see optical parameters below) Visual status indicats (LEDs) SPA status LED Per pt LEDs Carrier/Alarm Active/Loopback Protect (DPT/RPR mode) Pass Through (DPT/RPR mode)
Physical specifications	Weight: 0.75 lbs (0.34 kg) Height: 0.8 inches (2.03 cm) Width: 6.75 inches (17.15 cm) Depth: 7.28 inches (18.49 cm)
Power	18 Watts maximum (4-pt) 15.5 Watts maximum (1-, 2-, and 4-Pt) 12 Watts maximum (1-pt)

Compare to Similar Item

Table 2 shows the comparison between SPA-2XCHOC12/DS0 and SPA-2XOC48POS/RPR.

Model	SPA-2XCHOC12/DS0	SPA-2XOC48POS/RPR
Type	Cisco ASR 9000 Series Shared Pt Adapter	Cisco Router Shared Pt Adapter
Product compatibility	Cisco ASR 9000 Series Router	Cisco Catalyst 6500 Series Switches Cisco 7600 Series Routers Cisco 12000 Series Routers Cisco XR 12000 Series Routers Cisco ASR 1000 Series Router Cisco ASR 9000 Series Router(2 pt only) Cisco CRS Carrier Routing System(2 and 4 pt only)
Pt density per SPA	2-pt channelized OC-12/STM-4	1, 2, and 4 pts

Get Me Infmation

Do you have any question about the Cisco SPA-2XOC48POS/RPR?

Specification

SPA-2XOC48POS/RPR Specifications
Type	Cisco Router Shared Port Adapter
Product Compatibility	Cisco Catalyst 6500 Series Switches Cisco 7600 Series Routers Cisco 12000 Series Routers Cisco XR 12000 Series Routers Cisco ASR 1000 Series Router Cisco ASR 9000 Series Router(2 port only) Cisco CRS Carrier Routing System(2 and 4 port only)
Port Density per SPA	1, 2, and 4 ports
Physical Interface	OC-48c/STM-16c SFP optics module (see optical parameters below) Visual status indicators (LEDs) • SPA status LED • Per port LEDs • Carrier/Alarm • Active/Loopback • Protect (DPT/RPR mode) • Pass Through (DPT/RPR mode)
Protocols (see table below for RPR/SRP support info)	High-Level Data Link Control (HDLC), RFC 2615 Point-to-Point Protocol (PPP), RFC 1662 Frame Relay, RFC 2427 IPv4/IPv6 IEEE 802.17 - Resilient Packet Ring (RPR) IETF 2892 - Spatial Reuse Protocol (SRP)
Features and Functions	Synchronization • Local (internal) or loop timed (recovered from network) • Stratum 3 clock accuracy (± 4.6 ppm) over full operating temperature • Pointer activity monitoring Local (diagnostic) and line (network) loopback Section DCC (SDCC) - Platform-dependent feature Payload mapping • 1 + X^43 self-synchronous scrambler SONET/SDH compliance • Telecordia (Bellcore) GR-253-CORE (as applicable) • ANSI T1.105, T1.231 • ITU-T G.707, G.957, G.825 (as applicable) Supported SONET/SDH alarm and signal events • Signal Failure Bit Error Rate (SF-BER) • Signal Degrade Bit Error Rate (SD-BER) • Signal Label Payload Construction (C2) • Path Trace Byte (J1) • Section • Loss of Signal (LOS) • Loss of Frame (LOF) • Error Counts for B1 • Threshold Crossing Alarms (TCA) for B1 • Line • Line Alarm Indication Signal (LAIS) • Line Remote Defect Indication (LRDI) • Line Remote Error Indication (LREI) • Error Counts for B2 • Threshold Crossing Alarms (TCA) for B2 • Path • Path Alarm Indication Signal (PAIS) • Path Remote Defect Indication (PRDI) • Path Remote Error Indication (PREI) • Error Counts for B3 • Threshold Crossing Alarms (TCA) for B3 • Loss of Pointer (LOP) • Positive Stuffing Event (PSE) • Negative Stuffing Event (NSE) • Path Unequipped Indication Signal (PUNEQ) • Path Payload Mismatch Indication Signal (PPLM)
Network Management	RFC 2558 MIB (SONET/SDH) Simple Network Management Protocol (SNMP)
Reliability and Availability	Online insertion and removal (OIR) Field-replaceable SFP optical modules 1+1 SONET Automatic Protection Switching (APS) and SDH Linear Multiplexer Section Protection (MSP) protocols Single SPA software reset
Physical Specifications	Weight: 0.75 lbs (0.34 kg) Height: 0.8 inches (2.03 cm) Width: 6.75 inches (17.15 cm) Depth: 7.28 inches (18.49 cm)
Power	18 Watts maximum (4-port) 15.5 Watts maximum (1-, 2-, and 4-Port) 12 Watts maximum (1-port)
Environmental Specifications	Operating temperature: 41° to 104°F (5° to 40°C) Storage temperature: -38° to 150°F (-40° to 70°C) Operating humidity: 5 to 85% relative humidity Storage humidity: 5 to 95% relative humidity
Compliance and Agency Approvals	Safety UL 60950 CSA 22.2-No.60950 EN60950 IEC 60950 CB Scheme ACA TS001 AS/NZS 3260 EN60825/IEC60825 laser safety (SR, IR-Class 1) (VSR-Class 1M)1 21CFR1040 -FDA Code of Federal Regulations (USA) laser safety (SR, IR-Class 1) (VSR-Class 1M)1 EMC FCC Part 15 (CFR 47) ICES 003 EN55022 CISPR 22 AS/NZ 3548 VCCI EN55024 EN50082-1 EN61000-6-1 EN61000-3-2 EN61000-3-3 Network Equipment Building System (NEBS) This product is designed to meet the following requirements (official qualification may be in progress): SR-3580 - NEBS: criteria levels (Level 3 compliant) GR-63-Core - NEBS: physical protection GR-1089-Core - NEBS: EMC and safety European Telecommunications Standard Institute (ETSI) EN300 386/EN300 386-2 Class B ETS 300 019 Storage Class 1.1 ETS 300 019 Transportation Class 2.3 ETS 300 019 Stationary Use Class 3.1

Shipping & Payment

Delivery

Cargo will be delivered within 1 day after payment arrived. Tracking Number will be offered once delivery done.

Delivery Options	Estimated Delivery Time
DHL	2-4 business days
Fedex	2-4 business days
Hong Kong EMS	5-10 business days
Hong Kong Air Parcel	10-20 business days
By Sea	10-20 business days

Notice:

Above mentioned information are just for your reference only,we will keep you posted for the tracking delivery schedule.There are two delivery options available for by air and by sea:

Deliver to port:

daqintech.com is responsible for transporting goods to port. All subsequent customs and transportation fees are the
responsibility of the buyer. Router-switch will recommend trustworthy local freight forwarders to you.daqintech.com can facilitate the progress under buyer's permission and at buyer's expense.

Deliver to door:

daqintech.com will quote all destination charge prior once we have confirmed order.
daqintech.com is responsible for transporting goods to door after you have made the payment.

Payment Methods


Paypal	Master Card	Visa


Discover	American Express	JCB


Wire Transfer	eCheck	WestUnion

Warranty

Warranty

100% Low Price Guarantee:

daqintech.com provides high-quality products at low wholesale prices

All items are ORIGINAL and GENUINE only:

Item conditions are all "New Sealed".
All items are fully tested with working conditions by Huawei certified engineer under customers' permission.

100% Money Back Guarantee:

If your returns meet our relevent standards，you can contact our customer service team to exchange or return any product that you bought from us.

Professional Technical Support:

daqintech.com experienced technical team can provide support over the phone, by chat, by email or by remotely login.

Flexible Secure Payment & Shipment:

Verified authorization: Mcafee Secure, VeriSign Secured

Return Material Authorization (RMA) Process

Standard Hardware Warranty Policy:

Original new sealed Huawei product: 1 Year.

The Support Contacts:

If your products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.

Standard Services